Robot Pi Shop

BCD7447 - 7-Segment Decoder

$0.90

Shipping calculated at checkout.

Quantity

7447 BCD to 7-Segment Decoder/Driver IC – Common Anode, DIP-16

The 7447 BCD to 7-Segment Decoder/Driver is a TTL logic IC designed to convert a 4-bit BCD (Binary-Coded Decimal) input into the seven control signals required to display decimal digits 0 to 9 on a compatible common-anode 7-segment display.

The IC simplifies digital display circuits by automatically decoding the four BCD input lines into the correct segment pattern. It is widely used in digital counters, clocks, frequency displays, measurement equipment, educational electronics, and logic-circuit experiments.

Technical Specifications

  • IC Number: 7447 / SN7447A
  • Function: BCD to 7-Segment Decoder / Driver
  • Logic Family: TTL
  • BCD Inputs: 4
  • Segment Outputs: 7 (a, b, c, d, e, f, g)
  • Output Type: Open-Collector
  • Output Logic: Active LOW
  • Display Type: Common-Anode 7-Segment Display
  • Supply Voltage: 5V TTL Supply
  • Recommended Supply Range: Approximately 4.75–5.25V
  • Lamp Test Function: Yes
  • Blanking Function: Yes
  • Ripple Blanking: Yes
  • Leading / Trailing Zero Suppression: Supported
  • Package: DIP-16
  • Number of Pins: 16
  • Mounting Type: Through-Hole
  • Operating Temperature: Typically 0°C to +70°C for Commercial SN7447A Versions

BCD to 7-Segment Conversion

The 7447 accepts a four-bit 8421 BCD input using inputs A, B, C, and D.

For example:

0000 → Displays 0

0001 → Displays 1

0010 → Displays 2

0011 → Displays 3

0100 → Displays 4

0101 → Displays 5

0110 → Displays 6

0111 → Displays 7

1000 → Displays 8

1001 → Displays 9

This eliminates the need to manually generate the seven individual segment signals using multiple logic gates.

Common-Anode Display Driver

The 7447 is designed for common-anode displays.

Its segment outputs are active LOW and open-collector, meaning the IC turns a segment on by pulling the corresponding output LOW.

The common-anode connection of the display is connected to the positive supply, while the individual segments are controlled through the 7447 outputs.

Appropriate current-limiting resistors should be used with the LED segments.

Control Functions

In addition to normal BCD decoding, the 7447 provides several useful display-control functions.

LT – Lamp Test

The active-low Lamp Test input can be used to illuminate all seven segments for display testing.

BI – Blanking Input

The blanking function can turn off the displayed digit regardless of the BCD input.

RBI – Ripple Blanking Input

Used together with the ripple-blanking output for suppressing unnecessary leading or trailing zeros in multi-digit displays.

RBO – Ripple Blanking Output

Allows the blanking function to be cascaded between multiple 7447 ICs in multi-digit display systems.

DIP-16 Pin Configuration

For the standard 16-pin package:

  • Pin 1: B – BCD Input
  • Pin 2: C – BCD Input
  • Pin 3: LT – Lamp Test
  • Pin 4: BI/RBO – Blanking Input / Ripple Blanking Output
  • Pin 5: RBI – Ripple Blanking Input
  • Pin 6: D – BCD Input
  • Pin 7: A – BCD Input
  • Pin 8: GND
  • Pin 9: Segment e Output
  • Pin 10: Segment d Output
  • Pin 11: Segment c Output
  • Pin 12: Segment b Output
  • Pin 13: Segment a Output
  • Pin 14: Segment g Output
  • Pin 15: Segment f Output
  • Pin 16: VCC

7447 vs 7448

The 7447 and 7448 perform similar BCD decoding functions but are intended for different display arrangements.

7447: Active-low outputs for common-anode 7-segment displays

7448: Active-high outputs intended for common-cathode display-driving arrangements

Therefore, the correct IC should be selected according to the type of 7-segment display being used.

Applications

Ideal for digital counters, electronic clocks, scoreboards, frequency counters, digital measurement equipment, number displays, laboratory experiments, TTL logic projects, educational electronics, breadboard circuits, and DIY digital systems.

Important Note

The 7447 uses open-collector segment outputs. Appropriate current-limiting resistors are required when driving LED segments.

The IC is designed primarily for 5V TTL logic and should not automatically be treated as a 3.3V logic device.

BCD inputs from 0000 to 1001 represent decimal digits 0 through 9. Input combinations above decimal 9 are not valid BCD digits and may produce special/non-decimal display patterns.

Different devices may be marked 7447, 7447A, SN7447A, 74LS47, or similar, and their electrical characteristics are not completely identical. The datasheet for the exact IC supplied should be checked when maximum output current, power consumption, or other electrical limits are important.

Package Includes

1 × 7447 BCD to 7-Segment Decoder/Driver IC – DIP-16