SN7485 4-Bit Magnitude Comparator IC – DIP-16
The SN7485 is a 4-bit magnitude comparator integrated circuit from the 7400-series TTL logic family. It is designed to compare two 4-bit binary numbers and determine whether one number is greater than, less than, or equal to the other.
The IC provides three comparison outputs: A > B, A < B, and A = B. It also includes cascade inputs, allowing multiple comparator ICs to be connected for comparing binary numbers larger than 4 bits.
The SN7485 is suitable for digital logic circuits, microprocessor systems, binary comparison applications, and educational electronics projects.
Key Features
-
4-Bit Binary Comparison: Compares two 4-bit binary numbers.
-
Three Comparison Outputs: Indicates A > B, A < B, or A = B.
-
TTL Logic: Designed for standard 5V digital circuits.
-
Cascadable Design: Supports comparison of binary numbers wider than 4 bits.
-
Combinational Logic: Produces comparison results without requiring a clock signal.
-
Parallel Inputs: Compares all four bits of each binary number.
-
DIP-16 Package: Suitable for breadboards and through-hole PCB assembly.
-
Digital Logic Applications: Ideal for control systems and educational experiments.
Technical Specifications
| Parameter |
Specification |
| Part Number |
SN7485 |
| IC Type |
4-Bit Magnitude Comparator |
| Logic Family |
7400 Series TTL |
| Comparison Type |
Unsigned Binary |
| Number of Input Bits |
4 Bits per Operand |
| Number of Binary Operands |
2 |
| Comparison Outputs |
A > B, A < B, A = B |
| Cascade Inputs |
3 |
| Nominal Supply Voltage |
5V DC |
| Operating Voltage |
4.75–5.25V DC |
| Logic Type |
TTL |
| Clock Required |
No |
| Package Type |
DIP-16 |
| Number of Pins |
16 |
| Mounting Type |
Through-Hole |
| Operating Temperature |
0°C to +70°C (standard commercial version) |
Pin Configuration
| Pin |
Function |
Description |
| 1 |
B3 |
Operand B, Bit 3 (MSB) |
| 2 |
I(A < B) |
Less-Than Cascade Input |
| 3 |
I(A = B) |
Equal Cascade Input |
| 4 |
I(A > B) |
Greater-Than Cascade Input |
| 5 |
O(A > B) |
Greater-Than Output |
| 6 |
O(A = B) |
Equal Output |
| 7 |
O(A < B) |
Less-Than Output |
| 8 |
GND |
Ground |
| 9 |
B0 |
Operand B, Bit 0 (LSB) |
| 10 |
A0 |
Operand A, Bit 0 (LSB) |
| 11 |
B1 |
Operand B, Bit 1 |
| 12 |
A1 |
Operand A, Bit 1 |
| 13 |
A2 |
Operand A, Bit 2 |
| 14 |
B2 |
Operand B, Bit 2 |
| 15 |
A3 |
Operand A, Bit 3 (MSB) |
| 16 |
VCC |
+5V Power Supply |
Comparison Truth Table
For standalone 4-bit operation, configure the cascade inputs as follows:
- I(A < B) = LOW
- I(A = B) = HIGH
- I(A > B) = LOW
| Binary A |
Binary B |
A > B |
A = B |
A < B |
| 0101 (5) |
0011 (3) |
1 |
0 |
0 |
| 0010 (2) |
0110 (6) |
0 |
0 |
1 |
| 1001 (9) |
1001 (9) |
0 |
1 |
0 |
| 1111 (15) |
0000 (0) |
1 |
0 |
0 |
| 0000 (0) |
1111 (15) |
0 |
0 |
1 |
The outputs indicate the relationship between the two unsigned binary numbers.
Connection Example
To compare two 4-bit binary numbers:
- Connect Pin 16 (VCC) to +5V DC.
- Connect Pin 8 (GND) to ground.
- Connect the first binary number to A0–A3.
- Connect the second binary number to B0–B3.
- Connect Pin 2 and Pin 4 to logic LOW.
- Connect Pin 3 to logic HIGH.
- Read the comparison results:
-
- Pin 5: A > B
- Pin 6: A = B
- Pin 7: A < B
Cascading Multiple Comparators
Multiple SN7485 ICs can be connected to compare 8-bit, 12-bit, or larger binary numbers.
For an 8-bit comparison:
- Use one SN7485 for the lower 4 bits.
- Use another SN7485 for the upper 4 bits.
- Connect the comparison outputs of the lower-bit comparator to the corresponding cascade inputs of the upper-bit comparator.
- Read the final comparison result from the upper-bit comparator.
Applications
- Binary Number Comparison
- Digital Logic Circuits
- Arithmetic Logic Systems
- Microprocessor Interface Circuits
- Digital Control Systems
- Address Comparison Circuits
- Educational Electronics Experiments
- Breadboard and PCB Prototyping
Important Notes
-
Power Supply: Use a regulated 5V DC supply.
-
Logic Compatibility: Designed for standard TTL logic levels.
-
Unsigned Comparison: Compares unsigned binary values.
-
Cascade Inputs: Must be connected to defined logic levels.
-
Clock: No external clock is required.
-
Decoupling: Use a 100nF capacitor between VCC and GND near the IC.
-
Microcontroller Compatibility: Verify voltage compatibility before connecting to ESP32, Raspberry Pi, or other 3.3V devices.
-
Variant Differences: SN7485, SN74LS85, and SN74HC85 perform similar comparison functions but have different electrical specifications.
Package Includes