20-Slot Motor Speed Encoder Disc – 26mm
The 20-Slot Motor Speed Encoder Disc is a precision-cut acrylic wheel designed for measuring rotational speed and counting motor revolutions in robotics and electronics projects.
Featuring 20 evenly spaced slots, the disc works with a compatible optical interrupter sensor to generate pulses as the motor rotates. These pulses can be processed by Arduino, ESP32, Raspberry Pi, or other microcontrollers to calculate motor speed (RPM), monitor rotation, and estimate movement.
Manufactured from black acrylic with a thickness of 3mm, this compact encoder disc is suitable for DC motors, robotic vehicles, and DIY motion control applications.
Key Features
-
20-Slot Design: Provides 20 optical interruptions per revolution.
-
Accurate Speed Measurement: Enables RPM calculation when used with a compatible optical sensor.
-
Black Acrylic Construction: Lightweight and suitable for optical interruption applications.
-
Laser-Cut Design: Provides consistent slot spacing.
-
Compact Size: 26mm outer diameter.
-
Easy Integration: Suitable for compatible motor shafts and robotics assemblies.
-
Microcontroller Compatible: Can be used in Arduino, ESP32, and Raspberry Pi projects with an appropriate optical sensor.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Motor Speed Encoder Disc |
| Material |
Black Acrylic |
| Outer Diameter |
Approximately 26mm |
| Thickness |
3mm |
| Center Opening |
Approximately 5.5 × 3.5mm |
| Number of Slots |
20 |
| Encoder Type |
Incremental Optical Disc |
| Pulses per Revolution |
20 with one pulse per slot |
| Sensor Compatibility |
Optical Slot / Photointerrupter Sensor |
| Electrical Connection |
None – Passive Component |
How It Works
The encoder disc is mounted onto a rotating motor shaft and positioned inside a compatible optical interrupter sensor.
As the disc rotates, its slots alternately allow and block the sensor's light beam, producing electrical pulses.
The microcontroller counts these pulses to determine rotational speed.
RPM Calculation:
RPM = (Pulse Frequency × 60) / 20
For example, if the sensor detects 100 pulses per second:
RPM = (100 × 60) / 20 = 300 RPM
This calculation assumes one counted pulse per slot and a disc mounted directly to the measured shaft.
Recommended Components
For a complete motor speed measurement system, the following components can be used:
| Component |
Purpose |
| Optical Speed Sensor Module |
Detects the rotating disc slots |
| Arduino Uno / Nano |
Processes pulses and calculates RPM |
| ESP32 Development Board |
Measures RPM and enables wireless monitoring |
| DC Gear Motor |
Provides rotational movement |
| Motor Driver Module |
Controls motor speed and direction |
Connection Example – Arduino
Connect a compatible optical speed sensor module to an Arduino:
| Sensor Pin |
Arduino Connection |
| VCC |
5V (if supported by the sensor) |
| GND |
GND |
| OUT / DO |
Digital Pin D2 |
Mount the encoder disc on the motor shaft and position it inside the optical sensor slot.
The Arduino can then count pulses to calculate rotational speed.
Applications
- DC Motor Speed Measurement
- Robot Wheel Rotation Monitoring
- Arduino and ESP32 Robotics
- Motor RPM Counters
- DIY Tachometers
- Educational Electronics Projects
- Motion Control Systems
- Robotic Vehicle Speed Monitoring
Important Notes
-
Sensor Not Included: An optical interrupter sensor is required to detect rotation.
-
Motor Not Included: This product is an encoder disc only.
-
Shaft Compatibility: Verify the motor shaft dimensions and shape before installation.
-
Mounting: Ensure the disc is properly aligned with the optical sensor.
-
Speed Measurement: The encoder measures shaft rotation; wheel speed calculations require additional wheel dimensions and any applicable gear ratio.
-
Direction Detection: A single optical sensor normally measures pulse frequency but cannot independently determine rotation direction.
Package Includes