Touch Exit Button – 12V Touch-Sensitive Door Release Switch for Access Control
The Touch Exit Button is a modern, touch-sensitive door release switch designed for electronic access control systems. It provides a convenient way to unlock doors without using a traditional mechanical push button.
Featuring a stylish square design, an illuminated touch indicator, and a durable plastic housing, this exit button is suitable for offices, residential buildings, commercial facilities, and security access systems.
The button operates using a 12V DC power supply and provides relay contact outputs for integration with compatible access controllers, electromagnetic locks, and electric door release systems.
Key Features
-
Touch-Sensitive Operation: Activate the door release with a simple touch.
-
Illuminated Indicator: Changes from blue to green when activated.
-
12V DC Operation: Designed for low-voltage access control systems.
-
Relay Contact Output: Provides connections for integration with compatible door controllers.
-
Modern Square Design: Elegant appearance suitable for residential and commercial installations.
-
Flexible Installation: Can be installed on walls, glass, and other suitable mounting surfaces.
-
Durable Construction: Hard plastic housing designed for regular use.
-
Long Service Life: Rated for up to 100,000 operating cycles according to the supplied specifications.
-
Access Control Compatibility: Suitable for compatible door access controllers, door phones, and electric locking systems.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Touch Exit Button |
| Function |
Electronic Door Release |
| Operating Voltage |
12V DC |
| Activation Method |
Touch-Sensitive |
| Indicator Color |
Blue / Green |
| Output Type |
Relay Contact |
| Output Connections |
COM, NO |
| Housing Material |
Hard Plastic |
| Dimensions |
86 × 86 × 20 mm |
| Mechanical Life |
100,000 Cycles (listed) |
| Mounting |
Surface Installation |
| Application |
Door Access Control |
| Compatible Systems |
Access Controllers and Compatible Electric Locks |
Wiring and Pin Configuration
The touch exit button uses a 12V DC power supply and provides a relay output for connection to an access control system.
| Terminal |
Function |
Connection |
| +12V |
Positive Power Input |
12V DC Supply |
| GND |
Ground |
Power Supply Negative |
| COM |
Relay Common |
Access Controller / Lock Circuit |
| NO |
Normally Open Contact |
Access Controller / Lock Circuit |
| PUSH |
Exit Trigger Connection |
Access Controller Exit Input, where applicable |
Important: The existing product information refers to five connections, but the exact terminal arrangement should be verified on the physical unit before installation.
Connection Example
Connecting to an Access Control System
- Connect the button's +12V terminal to a regulated 12V DC power supply.
- Connect GND to the power supply negative terminal.
- Connect the relay output to the compatible access controller's exit input according to its wiring diagram.
- Configure the access controller to release the door when the exit button is activated.
- Test the touch operation and door release function.
Note: Do not connect an electric lock directly to the button unless the relay contact rating and wiring configuration are confirmed to support the lock.
Applications
- Electronic Door Access Control
- Office Entrance and Exit Systems
- Residential Building Access
- Electromagnetic Door Lock Systems
- Electric Strike Release Systems
- Commercial Security Installations
- Apartment Entrance Systems
- Smart Building Automation
- Door Intercom Systems
- Indoor Access Control Projects
Important Notes
- Requires a regulated 12V DC power supply.
- Designed for compatible electronic door access control systems.
- Verify the terminal labels before wiring.
- The relay contact current and voltage ratings are not confirmed.
- Do not connect the device directly to 220V AC mains power.
- Check compatibility with the electric lock and access controller before installation.
- Outdoor or waterproof operation is not confirmed.
- For emergency exits and fire-rated doors, installation must comply with applicable safety and egress requirements.
- An appropriate mounting surface and installation method are required.
Package Includes