TP4056 Micro USB 5V 1A Lithium Battery Charger Module – With Battery Protection
The TP4056 Lithium Battery Charger Module with Protection is a compact charging and battery protection board designed for single-cell 3.7V lithium-ion and lithium-polymer batteries.
It combines the TP4056 charging controller with additional battery protection circuitry to provide charging functionality and protection against common battery electrical faults.
Unlike the basic TP4056 charging module, this version includes separate battery terminals and protected output terminals, making it suitable for rechargeable electronic projects requiring integrated battery protection.
Key Features
- TP4056 lithium battery charging IC
- Integrated battery protection circuitry
- Micro USB 5V power input
- Maximum charging current of 1A
- Adjustable charging current through programming resistor
- Constant-current/constant-voltage charging
- 4.2V charging termination voltage
- Overcharge protection
- Over-discharge protection
- Overcurrent and short-circuit protection
- Charging status LED indicators
- Separate battery and load output terminals
- Compact PCB design
Technical Specifications
| Parameter |
Specification |
| Charging IC |
TP4056 |
| Protection Circuit |
Integrated |
| Input Voltage |
4.5–5.5V DC |
| Recommended Input |
5V DC |
| Maximum Charging Current |
1A |
| Charging Current Adjustment |
Programming Resistor |
| Battery Type |
Single-Cell Li-ion / LiPo |
| Nominal Battery Voltage |
3.7V |
| Full Charge Voltage |
4.2V |
| Charging Method |
CC/CV |
| Input Connector |
Micro USB |
| Charging Indicator |
Red LED |
| Charge Complete Indicator |
Green LED |
| Overcharge Protection |
Yes |
| Over-Discharge Protection |
Yes |
| Overcurrent Protection |
Yes |
| Short-Circuit Protection |
Yes |
| PCB Dimensions |
Approximately 25 × 19 × 10 mm |
Pin Configuration
| Terminal |
Function |
| IN+ |
5V DC Positive Input |
| IN- |
Ground |
| B+ |
Battery Positive |
| B- |
Battery Negative |
| OUT+ |
Protected Positive Output |
| OUT- |
Protected Negative Output |
Connection Example
- Connect the battery positive terminal to B+.
- Connect the battery negative terminal to B-.
- Supply 5V through the Micro USB connector.
- Connect the load to OUT+ and OUT-.
- Ensure the connected load remains within the protection circuit's current rating.
Applications
- 18650 Lithium Battery Charging
- Rechargeable DIY Electronics
- Portable Battery-Powered Devices
- Arduino and ESP32 Battery Projects
- Robotics and Embedded Systems
- Single-Cell Battery Management
- Portable Sensor Projects
- Rechargeable LED Projects
Important Notes
-
Includes battery protection circuitry, unlike the basic TP4056 charging module.
- Designed for single-cell 3.7V lithium-ion or lithium-polymer batteries.
- Not suitable for charging multiple lithium cells connected in series.
- The protection circuit does not replace proper battery handling and thermal safety measures.
- The maximum load current depends on the installed protection circuitry.
- The module does not provide a regulated 5V output.
- This module is not a power-path controller; simultaneous charging and load operation may interfere with charge termination.
- Do not reverse the battery polarity.
Package Includes