TP4057 USB-C 5V 1A Lithium Battery Charging Module – 3.7V with Protection
The TP4057 Lithium Battery Charging Module is a compact, lightweight charging board designed for single-cell 3.7V lithium-ion and lithium-polymer batteries.
Featuring a USB Type-C power input, this module supports charging from a 5V DC supply with a listed maximum charging current of 1A.
Its miniature PCB design makes it particularly suitable for portable electronic devices, DIY projects, wearable electronics, and applications where installation space is limited.
The module also features battery protection circuitry, providing protection against over-discharge and other electrical faults according to the supplied product specifications.
Key Features
-
TP4057 Charging IC: Designed for single-cell lithium battery charging.
-
USB Type-C Input: Convenient connection to a 5V DC power source.
-
Up to 1A Charging Current: Listed default charging current of 1A.
-
Compact PCB Design: Suitable for miniature electronic devices.
-
Single-Cell Battery Charging: Compatible with suitable 3.7V lithium-ion and lithium-polymer batteries.
-
Battery Protection: Listed over-discharge and overcurrent protection.
-
4.2V Charging Voltage: Suitable for standard 3.7V nominal lithium cells.
-
Thin PCB Construction: Designed for space-constrained installations.
-
Easy Integration: Solder pads for connecting the battery and external circuit.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Lithium Battery Charging Module |
| Charging IC |
TP4057 |
| Input Connector |
USB Type-C |
| Input Voltage |
5–6V DC (listed) |
| Recommended Input |
5V DC |
| Default Charging Current |
1A (listed) |
| Battery Type |
Single-Cell Li-ion / LiPo |
| Nominal Battery Voltage |
3.7V |
| Full Charge Voltage |
4.2V |
| Charging Method |
Constant Current / Constant Voltage |
| Battery Protection |
Listed as Included |
| Over-Discharge Threshold |
2.4V (listed) |
| PCB Design |
Miniature |
| PCB Thickness |
0.6 mm (listed) |
| Battery Connection |
Solder Pads |
| Output Connection |
Solder Pads |
Pin Configuration
| Terminal |
Function |
| IN+ |
Positive DC Input |
| IN- |
Ground |
| B+ / BAT+ |
Battery Positive |
| B- / BAT- |
Battery Negative |
| OUT+ |
Positive Load Output, if marked |
| OUT- |
Negative Load Output, if marked |
Note: Check the actual PCB markings before wiring. Terminal arrangements can vary between module versions.
Connection Example
Charging a Single 18650 Lithium Battery
- Connect the battery positive terminal to the battery positive pad.
- Connect the battery negative terminal to the battery negative pad.
- Connect a suitable 5V USB-C power supply.
- Allow the module to charge the battery.
- Connect an external load only to the designated output pads, if provided, and within the module's rated limits.
Applications
- 18650 Lithium Battery Charging
- Portable Electronics
- Wearable Electronic Devices
- DIY Rechargeable Projects
- Compact Sensor Devices
- Arduino and ESP32 Battery Projects
- Small Electronic Equipment
- Embedded Systems
- Battery-Powered LED Projects
Important Notes
- Designed for one 3.7V nominal lithium cell or a properly matched parallel-cell group.
- Not suitable for charging lithium batteries connected in series.
- Use a regulated 5V DC power supply.
- Confirm that the charging current is appropriate for the battery.
- Battery protection functions and thresholds should be verified against the actual module.
- Do not reverse battery polarity.
- The output is not a regulated 5V supply.
- This module is not a power-bank boost converter.
- Simultaneous charging and load operation may interfere with charging termination.
- Use suitable battery protection and thermal safety precautions.
Package Includes