Traffic Light LED Module – Red, Yellow & Green 5V
The Traffic Light LED Display Module is a compact electronic module featuring three individually controllable LEDs in red, yellow, and green. Designed to simulate a standard traffic light, it is ideal for Arduino projects, educational electronics, robotics, and traffic signal demonstrations.
Operating at 5V DC, the module allows each LED to be controlled independently through digital output pins on a microcontroller, making it suitable for learning programming, timing sequences, and digital output control.
Key Features
-
Three LED Colors: Red, yellow, and green for traffic light simulation.
-
Independent LED Control: Each LED can be switched on or off individually.
-
5V Operation: Suitable for Arduino and compatible microcontroller projects.
-
Common Cathode Design: Shared ground connection for all three LEDs.
-
Digital Control: Simple GPIO-based LED operation.
-
Compact PCB: Easy to integrate into electronic projects.
-
Educational Module: Ideal for learning traffic light sequences and basic programming.
-
Mounting Holes: Convenient installation in DIY projects.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Traffic Light LED Module |
| Operating Voltage |
5V DC |
| LED Colors |
Red, Yellow, Green |
| Number of LEDs |
3 |
| LED Diameter |
5mm |
| LED Brightness |
Standard |
| Control Interface |
Digital GPIO |
| LED Configuration |
Common Cathode |
| LED Control |
Independent |
| PCB Dimensions |
56 × 21 × 11mm |
| Red LED Current |
Approximately 13mA (as listed) |
Pin Configuration
| Pin |
Function |
| R |
Red LED Control |
| Y |
Yellow LED Control |
| G |
Green LED Control |
| GND |
Common Ground |
Confirm the actual pin order from the PCB markings before wiring.
Arduino Connection Example
| Traffic Light Module |
Arduino UNO |
| Red LED |
D8 |
| Yellow LED |
D9 |
| Green LED |
D10 |
| GND |
GND |
The module can be programmed to simulate a traffic light sequence using digital output commands.
Applications
- Arduino Traffic Light Projects
- STEM and Educational Electronics
- Traffic Signal Simulations
- Robotics Status Indicators
- Digital Output Experiments
- DIY Electronic Projects
- Microcontroller Programming Training
- Visual Warning and Status Systems
Important Notes
- Designed for 5V digital control.
- Each LED is controlled independently.
- Ensure correct polarity when connecting the module.
- For ESP32 and Raspberry Pi applications, verify 3.3V GPIO compatibility and LED current requirements before connecting directly.
- Intended for educational and low-power indication applications, not actual road traffic control.
- Use appropriate current limiting if not already provided on the module.
Package Includes