TTP223 Capacitive Touch Sensor Module – Digital Touch Button
The TTP223 Capacitive Touch Sensor Module is a compact, touch-sensitive electronic module designed to replace traditional mechanical push buttons with a simple touch interface.
Based on the TTP223 touch detection IC, the module detects changes in capacitance when a finger touches or approaches the sensing pad, generating a digital output signal that can be read by a microcontroller.
Operating at 2.0V to 5.5V DC, it is suitable for Arduino, ESP32, Raspberry Pi, and other microcontroller projects requiring touch-based control.
Key Features
-
Capacitive Touch Detection: Detects finger contact without mechanical movement.
-
TTP223 Touch Controller: Integrated touch sensing IC.
-
Digital Output: Provides a HIGH or LOW signal depending on touch status and configuration.
-
Single Touch Button: One touch-sensitive sensing area.
-
Wide Operating Voltage: Supports 2.0V to 5.5V DC.
-
Low Power Consumption: Suitable for battery-powered applications.
-
Fast Touch Response: Designed for responsive touch detection.
-
Compact PCB: Easy to integrate into electronic projects.
-
Configurable Output: Some module versions support momentary or toggle operation through onboard solder pads.
-
Microcontroller Compatible: Can interface with Arduino, ESP32, Raspberry Pi, and similar boards.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Capacitive Touch Sensor Module |
| Sensor IC |
TTP223 |
| Operating Voltage |
2.0–5.5V DC |
| Sensor Type |
Capacitive Touch |
| Number of Touch Channels |
1 |
| Output Type |
Digital |
| Default Output |
LOW when idle, HIGH when touched |
| Touch Detection |
Finger Touch / Proximity |
| Interface |
3-Pin Digital Interface |
| Typical PCB Dimensions |
Approximately 15 × 11mm |
| Output Modes |
Direct / Toggle (configuration-dependent) |
| Power Consumption |
Low Power |
Pin Configuration
| Pin |
Description |
| VCC |
Power Supply (2.0–5.5V DC) |
| GND |
Ground |
| OUT / SIG |
Digital Touch Detection Output |
Connection Examples
Arduino UNO
| TTP223 Module |
Arduino UNO |
| VCC |
5V |
| GND |
GND |
| OUT |
D2 |
ESP32
| TTP223 Module |
ESP32 |
| VCC |
3.3V |
| GND |
GND |
| OUT |
GPIO 4 |
Raspberry Pi
| TTP223 Module |
Raspberry Pi |
| VCC |
3.3V |
| GND |
GND |
| OUT |
GPIO 17 |
Important: When connecting to ESP32 or Raspberry Pi, power the module from 3.3V to maintain compatible GPIO signal levels.
Applications
- Touch-Sensitive Electronic Switches
- Arduino and ESP32 Projects
- Raspberry Pi GPIO Projects
- Smart Home Control Panels
- DIY Touch Buttons
- Interactive Electronics
- LED Touch Control
- Robotics Control Interfaces
- Educational Electronics Projects
- Embedded User Interfaces
Important Notes
- The module detects capacitive touch and does not require a mechanical button.
- Touch sensitivity may vary depending on the surrounding environment and mounting material.
- The default output is typically LOW when untouched and HIGH when touched.
- Output behavior can vary depending on onboard configuration.
- Do not exceed the maximum operating voltage of 5.5V.
- Confirm the pin labels before connecting the module.
- Avoid mounting the sensing pad directly against conductive metal surfaces.
- The module is not designed for use as a safety-critical control device.
Package Includes