TTP223B 1-Channel Capacitive Touch Sensor Module – Momentary Digital Touch Switch
The TTP223B Capacitive Touch Sensor Module is a compact, single-channel touch detection module designed to replace traditional mechanical push buttons with a touch-sensitive interface.
Based on the TTP223B touch detection IC, this module detects changes in capacitance when a finger touches or approaches the sensing area. It provides a digital HIGH signal when touched and returns to LOW when the finger is removed.
Featuring momentary (jog) operation, low power consumption, and a wide operating voltage range of 2–5.5V DC, it is suitable for Arduino, ESP32, Raspberry Pi, and other microcontroller projects.
The module can also detect touch through thin, non-metallic materials such as plastic, glass, or paper, making it suitable for concealed touch buttons and custom control panels.
Key Features
-
TTP223B Touch Detection IC: Capacitive touch sensing technology.
-
Single-Channel Touch Detection: One touch-sensitive input.
-
Momentary (Jog) Operation: Output remains HIGH while touched and returns LOW when released.
-
2–5.5V DC Operation: Compatible with common microcontroller voltage levels.
-
Low Power Consumption: Suitable for battery-powered electronic projects.
-
Digital Output: Simple HIGH/LOW signal for microcontroller input.
-
Touch Through Non-Metallic Materials: Supports installation behind thin plastic, glass, or paper.
-
Automatic Power Management: Switches between low-power and active sensing modes.
-
Compact PCB Design: Easy to integrate into custom electronic systems.
-
No Mechanical Contact Required: Reduces wear associated with conventional push buttons.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Capacitive Touch Sensor Module |
| Touch Controller IC |
TTP223B |
| Number of Channels |
1 |
| Operating Voltage |
2–5.5V DC |
| Sensor Technology |
Capacitive Touch |
| Output Type |
Digital HIGH / LOW |
| Operating Mode |
Momentary / Jog |
| Default Output |
LOW |
| Output When Touched |
HIGH |
| Output When Released |
LOW |
| Power Consumption |
Low Power |
| Power Management |
Automatic Low-Power Mode |
| Touch Surface |
PCB Capacitive Sensing Pad |
| Mounting |
PCB Mounting Holes |
| Interface |
3-Pin Connection |
Pin Configuration
| Pin |
Function |
| VCC |
Power Supply (2–5.5V DC) |
| GND |
Ground |
| OUT / SIG |
Digital Touch Detection Output |
Check the PCB markings to confirm the pin order before connecting.
Connection Examples
Arduino UNO
| TTP223B Module |
Arduino UNO |
| VCC |
5V |
| GND |
GND |
| OUT |
D2 |
ESP32
| TTP223B Module |
ESP32 |
| VCC |
3.3V |
| GND |
GND |
| OUT |
GPIO 4 |
Raspberry Pi
| TTP223B Module |
Raspberry Pi |
| VCC |
3.3V |
| GND |
GND |
| OUT |
GPIO 17 |
Important: For ESP32 and Raspberry Pi, use a 3.3V supply to ensure compatible GPIO signal levels.
Applications
- Touch-Sensitive Push Buttons
- Arduino and ESP32 Projects
- Raspberry Pi GPIO Control
- Smart Home Automation
- Hidden Touch Switches
- DIY Electronic Control Panels
- LED Touch Control
- Robotics Control Interfaces
- Educational Electronics
- Embedded User Interfaces
Important Notes
-
This module operates in momentary (jog) mode, not latching mode.
- The output is HIGH only while touch is detected.
- The output returns to LOW when the touch is released.
- Touch sensitivity may vary depending on mounting material, thickness, and surrounding electrical conditions.
- Non-metallic surfaces are recommended for concealed touch applications.
- Do not exceed the maximum operating voltage of 5.5V.
- Confirm the pin configuration before connecting power.
- Not intended for safety-critical switching applications.
Package Includes