Robot Pi Shop

ULN2003 Stepper Motor Driver Module

$1.50

Shipping calculated at checkout.

Quantity

ULN2003 Stepper Motor Driver Module – 5V–12V for 28BYJ-48

The ULN2003 Stepper Motor Driver Module is a compact and easy-to-use driver board designed to control 4-phase, 5-wire unipolar stepper motors, including the popular 28BYJ-48 stepper motor.

Built around the ULN2003A Darlington transistor array, this module allows microcontrollers such as Arduino, ESP32, and Raspberry Pi to control stepper motor rotation, speed, and direction through digital output signals.

The board features a dedicated 5-pin motor connector, four control inputs, and LED indicators to display the switching status of the motor phases.

Key Features

  • ULN2003A Driver IC: Seven-channel Darlington transistor array for driving inductive loads.
  • Stepper Motor Compatibility: Designed for 4-phase, 5-wire unipolar stepper motors.
  • 5V–12V Motor Supply: Supports compatible stepper motors within the module's rated supply range.
  • 4 Digital Control Inputs: IN1, IN2, IN3, and IN4 for stepper motor phase control.
  • LED Indicators: Four onboard LEDs indicate the activation of individual motor phases.
  • 5-Pin Motor Connector: Convenient connection for compatible 28BYJ-48 stepper motors.
  • Microcontroller Compatible: Can be controlled using Arduino, ESP32, Raspberry Pi, and other development boards.
  • Compact PCB Design: Suitable for robotics, automation, and electronics projects.

Technical Specifications

Parameter Specification
Product Type Stepper Motor Driver Module
Driver IC ULN2003A
Driver Technology Darlington Transistor Array
Motor Supply Voltage 5V–12V DC
Compatible Motor Type 4-Phase, 5-Wire Unipolar Stepper Motor
Typical Compatible Motor 28BYJ-48
Control Interface 4 Digital Inputs
Control Pins IN1, IN2, IN3, IN4
Motor Connector 5-Pin Connector
Status Indicators 4 LEDs
ULN2003A Output Channels 7
Maximum IC Output Current 500mA per channel (absolute maximum rating; thermal limits apply)
Maximum IC Output Voltage 50V
PCB Color Green

Pin Configuration

Pin Description
IN1 Stepper motor phase 1 control
IN2 Stepper motor phase 2 control
IN3 Stepper motor phase 3 control
IN4 Stepper motor phase 4 control
VCC / + Positive motor power supply
GND / − Ground connection
5-Pin Connector Connection to compatible unipolar stepper motor

Connection Example – Arduino UNO

ULN2003 Module Arduino UNO
IN1 D8
IN2 D9
IN3 D10
IN4 D11
GND GND
VCC External 5V Motor Supply

Connect the stepper motor to the onboard 5-pin connector. Use a motor power supply matching the motor's rated voltage and connect the external supply ground to the Arduino ground.

Applications

  • Arduino Stepper Motor Projects
  • Robotics and Automation
  • Small Motorized Mechanisms
  • Educational Electronics
  • DIY Positioning Systems
  • Rotating Displays and Platforms
  • Automated Model Projects
  • Microcontroller-Based Motion Control

Important Notes

  • Designed primarily for unipolar stepper motors, not standard 4-wire bipolar stepper motors.
  • Use a power supply matching the rated voltage and current requirements of the connected motor.
  • The ULN2003A uses Darlington outputs, which introduce a voltage drop and generate heat.
  • The module does not provide current limiting or microstepping control.
  • For ESP32 and Raspberry Pi applications, verify logic-level compatibility and use a common ground.
  • Do not power a motor directly from a microcontroller GPIO pin.
  • The 500mA per-channel specification is an IC limit, not a guaranteed continuous rating for the complete module.

Package Includes

  • 1 × ULN2003 Stepper Motor Driver Module