Compatible with Arduino

UNO R3 ATmega328P Development Board

$5.99

Shipping calculated at checkout.

Quantity

UNO R3 ATmega328P Development Board

The UNO R3 ATmega328P Development Board is a versatile microcontroller board designed for electronics prototyping, robotics, automation, and educational projects. Based on the ATmega328P 8-bit AVR microcontroller, it provides an easy-to-use platform for beginners, students, makers, and engineers.

Featuring 14 digital input/output pins, 6 analog inputs, and 6 PWM outputs, the UNO R3 supports a wide range of sensors, actuators, motors, displays, and expansion shields.

The board can be programmed using the Arduino IDE through its USB Type-B connection and supports popular communication interfaces, including UART, I2C, and SPI.

Key Features

  • ATmega328P Microcontroller: Reliable 8-bit AVR processor operating at 16 MHz.
  • UNO R3 Compatible: Supports Arduino UNO-compatible shields, libraries, and development tools.
  • 14 Digital I/O Pins: Suitable for connecting LEDs, switches, sensors, and control circuits.
  • 6 PWM Outputs: For LED dimming, motor speed control, and other PWM applications.
  • 6 Analog Inputs: 10-bit ADC for reading analog sensors.
  • USB Type-B Interface: Convenient programming and 5V power supply.
  • Multiple Communication Interfaces: UART, I2C, and SPI.
  • External Power Support: DC barrel jack and VIN input.
  • Onboard Reset Button: Easily restart the microcontroller.
  • Arduino IDE Support: Compatible with Arduino programming libraries and examples.
  • Expansion Capability: Compatible with a wide selection of Arduino UNO shields.

Technical Specifications

Parameter Specification
Board Type UNO R3-Compatible
Microcontroller ATmega328P
Architecture 8-bit AVR
Operating Voltage 5V DC
Clock Frequency 16 MHz
Digital I/O Pins 14
PWM Pins 6
Analog Input Pins 6
ADC Resolution 10-bit
Flash Memory 32 KB (0.5 KB used by bootloader)
SRAM 2 KB
EEPROM 1 KB
DC Current per I/O Pin 20 mA Recommended Limit
USB Interface USB Type-B
USB-to-Serial Converter Depends on Board Version
Recommended External Input 7–12V DC
External Input Limits 6–20V DC
Communication UART, I2C, SPI
Board Dimensions Approximately 68.6 × 53.4 mm
Programming Software Arduino IDE

Pin Configuration

Pin / Interface Function
D0 (RX) UART Serial Receive
D1 (TX) UART Serial Transmit
D2–D13 Digital Input / Output
D3, D5, D6, D9, D10, D11 PWM Outputs
A0–A5 Analog Inputs
A4 (SDA) I2C Data
A5 (SCL) I2C Clock
D10 (SS) SPI Slave Select
D11 (MOSI) SPI Data Output
D12 (MISO) SPI Data Input
D13 (SCK) SPI Clock
5V Regulated 5V Output
3.3V 3.3V Output
GND Ground
VIN External Power Input
RESET Microcontroller Reset

Power Supply Options

The Arduino UNO R3 can be powered using:

  1. USB Type-B: 5V supplied through a computer or compatible USB power source.
  2. DC Barrel Jack: Recommended external supply of 7–12V DC.
  3. VIN Pin: External input voltage, typically 7–12V DC.

When using an external power supply, ensure correct polarity and avoid exceeding the board's voltage limits.

Applications

  • Arduino Programming and Education
  • Robotics and Motor Control
  • Home Automation Projects
  • Sensor Monitoring and Data Acquisition
  • IoT Prototyping with External Communication Modules
  • LED Lighting and Display Control
  • Servo and Stepper Motor Projects
  • Electronic Prototyping
  • DIY Electronics and Embedded Systems
  • School and University Engineering Projects

Important Notes

  • This is an Arduino UNO R3-compatible development board, not necessarily an original Arduino-branded board.
  • The ATmega328P operates at 5V logic levels. Use appropriate level shifting when connecting 3.3V-only devices.
  • Motors, relays, and other high-current loads require suitable external driver circuits and power supplies.
  • The USB-to-serial converter may vary depending on the board version, such as CH340G or ATmega16U2.
  • Boards equipped with a CH340 USB interface may require a compatible driver.
  • The Arduino UNO R3 does not include built-in Wi-Fi or Bluetooth.
  • The 6–20V external input range represents limits, not the recommended operating range.

Package Includes

  • 1 × Arduino UNO R3 ATmega328P Development Board
  • 1 × USB Type-B Cable
  • Pin Header Strips