Robot Pi Shop

W1209 Digital Temperature Controller Thermostat – 12V with NTC Sensor

$3.99

Shipping calculated at checkout.

Quantity

W1209 Digital Temperature Controller Thermostat – 12V with NTC Sensor

The W1209 Digital Temperature Controller is a compact, programmable thermostat module designed for automatic temperature regulation in heating and cooling applications.

Equipped with a digital LED display, relay output, and external NTC temperature sensor, the W1209 monitors temperature and automatically switches connected equipment ON or OFF according to the configured settings.

The controller features three onboard push buttons for adjusting the target temperature, operating mode, and other parameters without requiring programming.

This version is supplied as an open PCB module without a protective enclosure, making it suitable for integration into custom electronic projects and control panels.

Key Features

  • Automatic Temperature Control: Controls heating or cooling devices based on measured temperature.
  • Heating and Cooling Modes: Configurable operation for different temperature regulation applications.
  • Wide Temperature Range: Supports -50°C to +110°C.
  • External NTC Sensor: Includes a temperature probe for remote temperature measurement.
  • Digital LED Display: Three-digit display for temperature readings and settings.
  • Adjustable Hysteresis: Helps prevent frequent relay switching near the target temperature.
  • Relay Output: Switches compatible external electrical loads.
  • Three-Button Interface: Easy temperature configuration without programming.
  • Relay Status LED: Indicates the relay's operating state.
  • Compact Open PCB: Suitable for installation inside custom enclosures and electronic systems.

Technical Specifications

Parameter Specification
Model W1209
Product Type Digital Thermostat Controller
Operating Voltage 12V DC (standard W1209 version)
Temperature Control Range -50°C to +110°C
Temperature Sensor External NTC Thermistor
Display 3-Digit LED
Display Resolution 0.1°C from -9.9°C to 99.9°C
Display Resolution Outside Range 1°C
Temperature Refresh Rate Approximately 0.5 Seconds
Control Modes Heating / Cooling
Relay Rating Up to 10A at 14V DC or 5A at 240V AC, as listed
Output Type Relay Switching
Configuration 3 Push Buttons
PCB Type Open Board
Protective Case Not Included

Temperature Control Modes

Heating Mode

The relay switches according to the configured temperature threshold and hysteresis to control a heating device.

Cooling Mode

The relay switches according to the configured temperature threshold and hysteresis to control a cooling device such as a fan.

Control Buttons

Button Function
SET Access and confirm settings
+ Increase selected value
− Decrease selected value

Connection and Wiring

Connection Function
DC + Positive 12V Power Supply
DC − Power Supply Ground
NTC Connector External Temperature Sensor
Relay COM Common Switching Contact
Relay NO Normally Open Switching Contact

The relay acts as an electrical switch and does not generate an output voltage.

Applications

  • Incubator Temperature Control
  • Cooling Fan Automation
  • DIY Heating Systems
  • Aquarium Temperature Monitoring
  • Electronic Equipment Cooling
  • Temperature-Controlled Cabinets
  • Robotics and Automation Projects
  • Educational Electronics Experiments
  • Custom Thermostat Systems

Important Notes

  • The standard W1209 controller operates from a 12V DC power supply. Confirm the voltage marking on the supplied board.
  • This version is supplied without a protective enclosure.
  • The temperature probe may be water-resistant, but the controller PCB must remain dry.
  • The module provides ON/OFF temperature control, not PID control.
  • The temperature measurement accuracy depends on the sensor and calibration.
  • Do not exceed the relay's rated voltage or current.
  • Mains-voltage installations require suitable insulation, an enclosure, and appropriate electrical protection.
  • For high-power equipment, use an appropriately rated external relay or contactor.

Package Includes

  • 1 × W1209 Digital Temperature Controller PCB
  • 1 × External NTC Temperature Probe