WeMos D1 Mini Pro ESP8266 WiFi Development Board – 4MB Flash
The WeMos D1 Mini Pro 4MB is a compact WiFi-enabled development board based on the ESP8266EX microcontroller. Designed for Internet of Things (IoT), wireless automation, and embedded electronics projects, it combines integrated WiFi connectivity, USB programming, and GPIO interfaces in a small form factor.
The board offers compatibility with the WeMos D1 Mini pin layout and supports programming through the Arduino IDE using the ESP8266 board package.
Its compact design makes it suitable for wireless sensor nodes, smart home devices, robotics, and space-constrained IoT applications.
Key Features
-
ESP8266EX Microcontroller: Integrated 32-bit processor with WiFi connectivity.
-
4MB Flash Memory: Storage for firmware and application code.
-
Built-in WiFi: Supports 2.4GHz IEEE 802.11 b/g/n networking.
-
Compact Design: Small footprint for embedded electronics projects.
-
Arduino IDE Compatible: Programmable using the ESP8266 Arduino core.
-
USB Programming: Onboard USB-to-UART interface for programming and serial communication.
-
D1 Mini Compatibility: Designed for compatibility with the D1 Mini pin layout and software.
-
Deep Sleep Support: Suitable for low-power applications with appropriate hardware configuration.
-
GPIO Interfaces: Supports digital I/O, PWM, UART, SPI, and software I2C.
-
External Antenna Connection: Supports an external antenna on versions equipped with the appropriate connector and antenna-selection circuitry.
Technical Specifications
| Parameter |
Specification |
| Product Model |
WeMos D1 Mini Pro |
| Microcontroller |
ESP8266EX |
| Processor |
32-bit Tensilica L106 |
| Clock Frequency |
80MHz / 160MHz |
| Flash Memory |
4MB (listed version) |
| Logic Voltage |
3.3V DC |
| USB Power Input |
5V DC |
| WiFi Standard |
IEEE 802.11 b/g/n |
| WiFi Frequency |
2.4GHz |
| Digital I/O |
Up to 11 GPIO (pin availability depends on board layout) |
| Analog Input |
1 ADC Channel |
| Communication |
UART, SPI, Software I2C |
| PWM |
Software PWM |
| Programming |
Arduino IDE, ESP8266 Core |
| USB Interface |
Micro USB |
| USB-to-UART Chip |
Depends on board revision |
| Deep Sleep |
Supported |
| Board Type |
ESP8266 WiFi Development Board |
Pin Configuration
| Pin |
Function |
| D0 / GPIO16 |
Digital I/O, Deep Sleep Wake |
| D1 / GPIO5 |
Digital I/O, I2C SCL |
| D2 / GPIO4 |
Digital I/O, I2C SDA |
| D3 / GPIO0 |
Digital I/O, Boot Configuration |
| D4 / GPIO2 |
Digital I/O, Boot Configuration |
| D5 / GPIO14 |
Digital I/O, SPI SCK |
| D6 / GPIO12 |
Digital I/O, SPI MISO |
| D7 / GPIO13 |
Digital I/O, SPI MOSI |
| D8 / GPIO15 |
Digital I/O, SPI CS |
| RX / GPIO3 |
UART Receive |
| TX / GPIO1 |
UART Transmit |
| A0 |
Analog Input |
| 3V3 |
3.3V Supply |
| GND |
Ground |
| 5V |
5V Power Rail |
| RST |
Reset |
Programming and Compatibility
The WeMos D1 Mini Pro can be programmed using the Arduino IDE after installing the ESP8266 board support package.
Supported development applications include:
- WiFi Client and Server Applications
- HTTP and MQTT Communication
- Wireless Sensor Monitoring
- Web-Based Device Control
- Smart Home Automation
- Cloud-Connected IoT Systems
- Wireless Data Logging
Applications
- Smart Home Automation
- IoT Sensor Networks
- WiFi-Controlled Relays
- Wireless Temperature and Humidity Monitoring
- Remote Data Logging
- Home Automation Controllers
- Robotics and Remote-Control Projects
- DIY Web Servers
- Educational Electronics Projects
- Battery-Powered IoT Devices
Important Notes
-
GPIO Logic Voltage: The ESP8266 operates at 3.3V. GPIO pins are not 5V tolerant.
-
Power Supply: Use a stable 5V USB supply or an appropriate regulated power source.
-
Analog Input: The external A0 voltage range depends on the board's resistor-divider configuration.
-
Deep Sleep: Some configurations require connecting GPIO16 to RST to enable automatic wake-up.
-
Boot Pins: GPIO0, GPIO2, and GPIO15 have specific startup requirements.
-
USB Driver: The required USB-to-UART driver depends on the converter chip fitted to the board.
-
Antenna Selection: External antenna operation depends on the installed connector and board configuration.
-
Flash Capacity: This listing refers to the 4MB version. Verify the actual installed flash capacity when using alternative board revisions.
Package Includes