Compatible with Arduino

WeMos ESP8266 ESP-12 WiFi Development Board

$5.99

Shipping calculated at checkout.

Quantity

WeMos ESP8266 ESP-12 WiFi Development Board

The WeMos ESP8266 ESP-12 WiFi Development Board is a compact wireless development platform based on the ESP8266 microcontroller. Designed for Internet of Things (IoT), smart home automation, wireless sensor networks, and DIY electronics, it provides built-in WiFi connectivity and programmable GPIO interfaces.

The board supports the Arduino IDE through the ESP8266 board package, allowing developers to create wireless applications using familiar Arduino programming tools.

Its compact design and expansion-friendly layout make it suitable for prototyping, educational projects, and embedded WiFi applications.

Key Features

  • ESP8266 WiFi Microcontroller: Integrated 32-bit processor for wireless embedded applications.
  • Built-in 2.4GHz WiFi: Supports IEEE 802.11 b/g/n wireless networking.
  • Arduino IDE Compatible: Programmable using the ESP8266 Arduino core.
  • GPIO Connectivity: Digital input/output pins for connecting sensors, relays, and peripherals.
  • Multiple Communication Interfaces: Supports UART, SPI, and software I2C.
  • PWM Support: Software PWM for LED brightness and motor control applications.
  • Compact Design: Suitable for space-constrained electronics projects.
  • Low-Power Modes: Supports ESP8266 sleep functions.
  • Expansion-Friendly: Compatible with suitable headers and external modules.

Technical Specifications

Parameter Specification
Product WeMos ESP8266 ESP-12 Development Board
Microcontroller ESP8266EX
WiFi Module ESP-12 Series
Processor 32-bit Tensilica L106
Clock Frequency 80MHz / 160MHz
Logic Voltage 3.3V DC
WiFi Standard IEEE 802.11 b/g/n
WiFi Frequency 2.4GHz
WiFi Security WPA / WPA2
Digital I/O ESP8266 GPIO, availability depends on board layout
Analog Input 1 ADC Channel
Communication Interfaces UART, SPI, Software I2C
PWM Software PWM
Programming Arduino IDE, ESP8266 Arduino Core
Flash Memory Depends on installed ESP-12 module
Antenna Integrated PCB Antenna
Deep Sleep Supported by ESP8266
Board Type WiFi Microcontroller Development Board

Pin Configuration

The ESP8266 provides several GPIO pins for connecting external electronic components.

ESP8266 Pin Function
GPIO0 Digital I/O, Boot Configuration
GPIO2 Digital I/O, Boot Configuration
GPIO4 Digital I/O, Software I2C SDA
GPIO5 Digital I/O, Software I2C SCL
GPIO12 Digital I/O, SPI MISO
GPIO13 Digital I/O, SPI MOSI
GPIO14 Digital I/O, SPI Clock
GPIO15 Digital I/O, Boot Configuration
GPIO16 Digital I/O, Deep Sleep Wake
GPIO1 UART TX
GPIO3 UART RX
ADC / A0 Analog Input
3V3 3.3V Power Supply
GND Ground
EN / CH_PD Chip Enable
RST Reset

Note: The accessible pins depend on the exact WeMos board design.

Programming and Compatibility

The board supports development using the Arduino IDE and ESP8266 board support package.

Arduino IDE Setup:

  1. Install the latest Arduino IDE.
  2. Open File → Preferences.
  3. Add the ESP8266 board manager URL:
  4. https://arduino.esp8266.com/stable/package_esp8266com_index.json
  5. Open Tools → Board → Boards Manager.
  6. Search for ESP8266.
  7. Install esp8266 by ESP8266 Community.
  8. Select the appropriate ESP8266 board configuration.
  9. Connect a compatible USB-to-serial programmer if required by the board.

Applications

  • Smart Home Automation
  • Internet of Things (IoT) Projects
  • Wireless Sensor Monitoring
  • WiFi-Controlled Relays
  • Remote Data Logging
  • Robotics and Automation
  • MQTT Communication
  • DIY Web Servers
  • Wireless Environmental Monitoring
  • Educational Electronics Projects

Important Notes

  • Operating Voltage: ESP8266 GPIO operates at 3.3V and is not 5V tolerant.
  • Power Supply: Use a stable regulated 3.3V supply for the ESP8266 circuitry unless the carrier board provides its own voltage regulator.
  • Programming: Some board versions require an external USB-to-UART programmer.
  • Boot Configuration: GPIO0, GPIO2, and GPIO15 must have appropriate logic levels during startup.
  • Analog Input: The ESP8266 chip ADC range is 0–1.0V. Some development boards include a voltage divider for higher input voltages.
  • Flash Memory: Capacity depends on the installed ESP-12 module.
  • Pin Compatibility: Confirm the board's pinout before connecting external peripherals.

Package Includes

  • 1 × WeMos ESP8266 ESP-12 WiFi Development Board