XH-M609 DC 12–36V Battery Over-Discharge Protection Module
The XH-M609 is an adjustable battery over-discharge protection module designed to help prevent excessive battery discharge in DC power systems.
Operating from 12V to 36V DC, the module monitors the battery voltage and automatically disconnects the connected load when the voltage falls below a preset threshold. Once the battery voltage recovers to the configured reconnection level, the module can restore power to the load.
Featuring a 3-digit LED voltage display, adjustable control buttons, and an onboard relay, the XH-M609 provides a convenient solution for battery-powered equipment, backup power systems, and DIY electronics projects.
Key Features
-
Over-Discharge Protection: Disconnects the load when battery voltage drops below the configured threshold.
-
Wide Operating Voltage: Supports DC 12–36V power systems.
-
Adjustable Cutoff Voltage: Allows users to configure the low-voltage disconnection point.
-
Automatic Reconnection: Restores the load connection when battery voltage reaches the configured recovery threshold.
-
Digital LED Display: Displays battery voltage and configuration values.
-
Relay-Based Switching: Controls the connection between the battery and external load.
-
Push-Button Configuration: Convenient adjustment of voltage settings.
-
Compact Design: Suitable for integration into battery-powered equipment.
-
Voltage Monitoring: Provides real-time battery voltage indication.
Technical Specifications
| Parameter |
Specification |
| Model |
XH-M609 |
| Module Type |
Battery Over-Discharge Protection |
| Operating Voltage |
DC 12–36V |
| Output Voltage |
Equal to input voltage when connected |
| Voltage Control Precision |
0.1V (listed) |
| Listed Power |
1.5W |
| Display |
3-Digit LED Digital Display |
| Switching Method |
Electromechanical Relay |
| Voltage Threshold |
Adjustable |
| Supported Applications |
Rechargeable Battery Systems |
| Battery Types |
Compatible lead-acid and lithium battery systems with appropriate protection |
| Board Dimensions |
Approximately 57 × 42mm |
| Configuration |
Onboard Push Buttons |
Operating Principle
The XH-M609 continuously monitors the voltage of the connected battery.
1. Normal Operation
When the battery voltage is above the configured low-voltage cutoff threshold, the relay allows power to reach the connected load.
2. Low-Voltage Detection
As the battery discharges, the module monitors the decreasing voltage.
3. Automatic Load Disconnection
When the voltage reaches the preset cutoff threshold, the relay disconnects the load to help prevent further battery discharge.
4. Voltage Recovery
After the battery is recharged and reaches the configured recovery threshold, the module reconnects the load.
Connection Guide
The module is installed between a compatible DC battery supply and the equipment being powered.
Battery Input:
- Connect the battery positive terminal to the module's designated positive input.
- Connect the battery negative terminal to the designated negative input.
Load Output:
- Connect the external DC load to the appropriate output terminals.
- Observe the polarity markings printed on the PCB.
Voltage Configuration:
- Use the onboard buttons to configure the cutoff and recovery thresholds.
- Verify the programmed settings using the digital display and a multimeter.
Always follow the terminal markings and connection diagram for the exact module revision.
Applications
- 12V and 24V Battery Systems
- Battery-Powered Electronics
- DIY Battery Protection Projects
- Solar Battery Systems
- Backup Power Applications
- Portable DC Equipment
- Lead-Acid Battery Monitoring
- Lithium Battery Systems with Dedicated BMS
- Low-Voltage Disconnect Circuits
- Battery-Powered Robotics Projects
Important Notes
-
Not a Battery Charger: The XH-M609 does not charge batteries or regulate charging current.
-
Over-Discharge Protection Only: It is intended to disconnect a load when battery voltage falls below a configured threshold.
-
Battery Compatibility: Set the cutoff and recovery voltages according to the battery chemistry and manufacturer specifications.
-
Lithium Batteries: A dedicated Battery Management System (BMS) is still required for cell-level protection, balancing, and overcurrent protection.
-
Relay Capacity: Check the onboard relay contact rating before connecting high-current loads.
-
Voltage Limits: Do not exceed the specified DC 12–36V operating range.
-
Voltage Recovery: Reconnection behavior depends on the configured thresholds and module settings.
-
Wiring Protection: Use appropriate fuses and correctly sized cables.
-
Installation: Protect the exposed circuit board from moisture, dust, and conductive surfaces.
Package Includes