YZC-131 20kg Load Cell Weight Sensor – Aluminum Strain Gauge
The YZC-131 20kg Load Cell Sensor is a compact strain gauge sensor designed to measure weight and applied force up to 20kg. Manufactured from aluminum alloy, this sensor converts mechanical deformation into a small electrical signal proportional to the applied load.
Featuring a 4-wire Wheatstone bridge configuration, the YZC-131 can be connected to an HX711 load cell amplifier module for digital weight measurement using Arduino, ESP32, Raspberry Pi, and other microcontroller platforms.
Its compact bar-type design makes it suitable for electronic weighing scales, robotics, automation, industrial monitoring, and DIY weight measurement systems.
Key Features
-
20kg Rated Capacity: Measures loads up to 20kg under correct mounting conditions.
-
Strain Gauge Technology: Converts mechanical deformation into an electrical signal.
-
Aluminum Alloy Construction: Lightweight and durable.
-
4-Wire Wheatstone Bridge: Provides a low-level differential analog output.
-
HX711 Compatible: Supports digital weight measurement using an HX711 amplifier.
-
Compact Bar-Type Design: Suitable for integration into weighing platforms.
-
Microcontroller Compatible: Works with Arduino, ESP32, and Raspberry Pi through a suitable interface.
-
Weight and Force Detection: Suitable for static weight measurement and load monitoring.
Technical Specifications
| Parameter |
Specification |
| Model |
YZC-131 |
| Product Type |
Load Cell Weight Sensor |
| Rated Capacity |
20kg |
| Sensor Technology |
Resistive Strain Gauge |
| Material |
Aluminum Alloy |
| Electrical Configuration |
Wheatstone Bridge |
| Output Signal |
Differential Analog Voltage |
| Number of Wires |
4 |
| Excitation Voltage |
5–10V DC (verify for supplied variant) |
| Recommended Interface |
HX711 Load Cell Amplifier |
| Compatible Platforms |
Arduino, ESP32, Raspberry Pi via HX711 |
| Mounting Type |
Bar-Type Load Cell |
| Measurement Type |
Weight / Applied Force |
Wire Configuration
| Signal |
Function |
HX711 Connection |
| E+ |
Excitation Positive |
E+ |
| E- |
Excitation Negative |
E- |
| S+ |
Signal Positive |
A+ |
| S- |
Signal Negative |
A- |
Note: Wire colors may vary depending on the manufacturer. Verify the wiring before connecting the sensor.
Connection with Arduino Using HX711
The YZC-131 produces a small analog signal that requires amplification and analog-to-digital conversion.
| HX711 Pin |
Arduino UNO |
| VCC |
5V |
| GND |
GND |
| DT / DOUT |
D3 |
| SCK / CLK |
D2 |
Connect the load cell's four wires to the corresponding HX711 bridge terminals.
For ESP32 and Raspberry Pi applications, ensure the HX711 digital interface operates at compatible 3.3V logic levels.
Working Principle
- A load is applied to the sensing end of the load cell.
- The aluminum bar experiences a small mechanical deformation.
- Internal strain gauges change their electrical resistance.
- The Wheatstone bridge generates a differential voltage proportional to the applied force.
- The HX711 amplifies and converts the signal into digital data.
- A microcontroller processes the calibrated readings to calculate weight.
Applications
- Digital Weighing Scales
- Arduino and ESP32 Weight Measurement
- Raspberry Pi Weighing Projects
- Smart Inventory Monitoring
- Robotics and Automation
- Package Weighing Systems
- Automated Dispensing Equipment
- Force Measurement Projects
- Industrial Weight Monitoring
- Educational Electronics Experiments
Important Notes
-
Maximum Capacity: Do not exceed the rated 20kg load.
-
HX711 Module: A suitable load cell amplifier and ADC is recommended for microcontroller integration.
-
Calibration Required: Calibrate using known reference weights before taking measurements.
-
Installation: Secure the fixed end and apply the load to the designated sensing end.
-
Load Direction: Avoid side loads, twisting, and excessive mechanical stress.
-
Excitation Voltage: Verify the recommended operating voltage for the supplied sensor.
-
Accuracy: Measurement accuracy depends on calibration, mounting, temperature, and signal-conditioning electronics.
-
Not for Safety-Critical Weighing: Do not use for lifting protection or certified commercial weighing without appropriate system validation.
Package Includes
HX711 amplifier and microcontroller are not included.